Add products by adding codes
Syringe - oil/fluid extractor Xtrobb 22007
OIL SUCTION SYRINGE 200ml
- UNIVERSAL USE - oil syringes have a wide range of applications and are used in various fields, especially where it is required suction or drainage of oil, fuel, brake fluid or other fluids, including automotive, industrial machinery, garden equipment, boats, yachts, petroleum industry .
- TWO HOSES + PLUGS INCLUDED - the extractor is equipped with 2 special flexible hoses 215mm and 225mm long with a diameter of 6mm and 4mm , which you insert into the oil filler hole. This way you can reach practically any tank and extend the working capabilities of the syringe. Additionally, the hoses are supplied with plugs that prevent spillage of the contents.
- CAPACITY – the syringe has a capacity of 200 ml. It has a measuring scale every 50 ml. The capacity is shown in milliliters and quarts.
- PISTON + VENT SYSTEM - at the opposite end of the syringe is a piston that allows for the creation of a vacuum inside the syringe and the suction of the oil. Once the tube is inserted into the appropriate location and the vacuum is created, the oil is drawn into the syringe, allowing for its safe and clean removal.
- SPECIFICATION - material: PPR, others: PP + nylon + aluminum + POM + rubber + iron + copper; hose lock: yes; capacity: 200 ml; dimensions: 29 cm, after extending the piston 44 cm; weight: 236 g; weight in packaging: 296 g.
SPECIFICATION
- material: PPR, others: PP + nylon + aluminum + POM + rubber + iron + copper
- hose lock: yes
- capacity: 200 ml
- dimension: 219 cm after extending the piston 44 cm
- weight: 236 g
- weight in package: 296 g
INCLUDED
- syringe
- 2 x gasket
- 2 x hose
- 2 x hose plug
- 1 x hose connector
An oil extractor syringe is a tool used to remove or drain oil or other fluids from hard-to-reach places. It is commonly used in cars, engines, and other equipment where regular oil changes are necessary.
PRODUCER:
ISO TRADE Spółka z o.o.
ul. Hangarowa 15
59-220 Legnica, Polska
office@iso-trade.biz
RESPONSIBLE PERSON IN THE EU:
ISO TRADE
WARNING CONTENT:
- Make sure the vacuum cleaner is clean before starting work to avoid contamination of fluids that will be removed or
reintroduced into the system.
- When working with oils or other fluids, especially chemically active ones (hydraulic fluids, brake fluids), always
wear protective gloves to protect your skin from contact with chemicals.
- Before vacuuming, make sure that the hose is properly immersed in the liquid you want to remove. Gently and evenly
pull the plunger to avoid excessive suction that could damage the device or its components.
- Always suction liquids slowly and control the amount to prevent overflow or unwanted splashes.
- Never attempt to suck up oil or other liquids that are too hot. Wait until the liquid has cooled to a safe temperature,
to avoid burns or damage to the tool
