PRODUCER:

ISO TRADE Spółka z o.o.
Gniewomierz 173,
59-241 Legnickie Pole, Poland



office@iso-trade.biz

RESPONSIBLE PERSON IN THE EU:

IsoTrade

WARNING CONTENT:

1. Before installing and operating the device, please read the operating instructions.
2. This heater is intended for indoor use only. Do not use it outdoors!
3. Plug the device into a socket that matches the heater's plug. Socket and power requirements: 220-240V, frequency 50-60 Hz.
4. Avoid installing the device behind a door.
5. Use only the voltage specified on the heater's nameplate.
6. Do not cover or restrict airflow to ventilation inlets or outlets as the unit may overheat and pose a fire hazard (applies to fan-assisted heaters).
7. Do not leave the heater unattended during use.
8. Keep the heater out of reach of children. Use the automatic timer with caution. If left unattended, the heater may turn on automatically.
9. Disassembling the radiator yourself is not allowed.
10. Before turning on the heater, make sure that no part of the heater is damaged. If the housing, heating element, cable, or plug are damaged, the heater must not be connected to the power supply.
11. Do not cover the ventilation grille or block the air inlet or outlet by placing the device near a surface.
12. Keep all objects at least 1 meter away from the front and sides of the device. Except for devices designed for wall mounting, also maintain a distance of 1 meter from the back of the device.
WARNING: THERE IS A RISK OF FIRE IF THE HEATER IS COVERED OR PLACED NEAR CURTAINS OR OTHER FLAMMABLE MATERIALS.
13. Do not place the device near a radiant heat source.
14. Do not use the device in places where fuel, paint or other flammable liquids are used or stored.
15. The device becomes hot during use. To avoid burns, do not touch hot surfaces with bare skin.
16. Turn off the device and use the handles, if available, when moving it.
17. Do not use the appliance to dry clothes.
18. Do not leave the device unattended during use.
19. Do not insert or allow foreign objects to enter the ventilation or exhaust openings, as this may result in electric shock, fire or damage to the appliance.
20. Do not immerse the device in liquid or allow liquid to enter the device as this may create a risk of electric shock.
21. Do not use the device on a wet surface or where it may be dropped or exposed to water.
22. Do not reach for a device that has fallen into water. Unplug it immediately.
23. Do not operate this appliance with a damaged plug or cord, or after it has been damaged or dropped. Consult a qualified electrician to have the appliance examined, repaired, or adjusted before operating it again.
24. Do not use the device with wet hands.
25. The appliance is intended for home use and not for commercial or industrial use.
26. Use the device only as described in the instructions. Any other use is not recommended by the manufacturer and may result in fire, electric shock, or injury.
27. A common cause of overheating is a buildup of dust or lint. Make sure you regularly remove this debris by unplugging the device and dusting the vents and grilles, if available.
28. Do not use the device near a window, as rain may cause electric shock.
29. Do not use abrasive cleaners to clean the device. Clean with a damp cloth (not wet) in hot, soapy water. Always unplug the appliance from the wall outlet before cleaning.
30. Do not connect the device to a power source until it is installed in its final location and positioned appropriately.
31. The appliance is not intended for use in bathrooms, laundry rooms or other places exposed to water, moisture or steam.
32. Always use the device on a flat, horizontal surface.
33. Turn off the device, then use the handles (if available) to reposition it.
34. Do not use the appliance with the cord wound up as this may cause heat build-up which is dangerous.
35. Using an extension cord with this device is not recommended.
36. Do not unplug the power cord from the socket – instead, grasp the plug.
37. Do not allow the cord to come into contact with hot surfaces while the appliance is operating.
38. Do not run the cord under carpets, rugs, or rugs, etc. Place the cord where it will not create an obstacle or tripping hazard.
39. Do not twist, bend, or wrap the cord around the device as this may weaken the insulation and cause it to crack.
40. Do not store the device in a box or enclosed space until it has cooled down sufficiently.
41. The appliance is not intended for use by persons (including children) with limited physical, sensory or mental capabilities or lacking experience and knowledge, unless they have been trained or supervised by a responsible person.
42. Young children should be supervised to ensure that they do not play with the appliance.
43. The device must not be placed directly below the socket.
44. Do not use the appliance with a programmer, timer or any other device that switches the heater on automatically, as there is a risk of fire if the appliance is covered or positioned incorrectly.
45. If the supply cord is damaged, it must be replaced by a qualified electrician in order to avoid a hazard.
46. Do not use the device outdoors or on wet surfaces. Avoid spilling any liquids on the device.
47. To avoid danger from unintentional resetting of a thermal cut-out, the appliance must not be powered through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility company.