Add products by adding codes
KAMINER IGNISSE column fan heater 2000W electric heater with fireplace effect + remote control!
burning fireplace effect – creates a cozy atmosphere in the room , and the vertical structure of the column ensures even heat distribution and space saving
LED display – shows the current temperature and operating mode, making it easier to use even in a dark room
remote control – full comfort of use without getting up
tilt safety switch – automatic power cut-off if the device is tipped over
adjustable thermostat 10–49°C – smooth temperature control, automatic power adjustment
24-hour timer – programming of working time from 1 to 24 hours
KAMINER column radiator specifications:
- compliant with European standards
- 2 power settings
- option: cool / warm / hot air to choose from
- adjustable thermostat
- overheating protection
- tilt switch
- wide-angle oscillation
- LED display
- remote control
- 24-hour timer
- fireplace effect
- stable base
- carrying handle
- maximum power: 2000 W
- voltage: 220 - 240 V / 50 - 60 Hz
- dimensions: 77 x 20 x 20 cm
- weight: 2.65 kg
- weight in packaging: 3.33 kg
- brand: KAMINER
- model: KAMINER IGNISSE 2000W Ceramic Heater
- color: black
- material: PP, iron, resin, PVC
Included in the set:
- heater
- pilot
- base
- foam protection for transport
- user manual
- brown shipping carton
PRODUCER:
ISO TRADE Spółka z o.o.
Gniewomierz 173,
59-241 Legnickie Pole, Poland
office@iso-trade.biz
RESPONSIBLE PERSON IN THE EU:
IsoTrade
WARNING CONTENT:
1. Before installing and operating the device, please read the operating instructions.
2. The product is intended for home use.
3. This heater is intended for indoor use only. Do not use it outdoors!
4. Connect the device to a socket that matches the heater's plug. Socket and power requirements: 220-240V, frequency 50-60 Hz.
5. Avoid installing the device behind a door.
6. Use only the voltage specified on the heater's rating plate.
7. Do not cover or obstruct the airflow to the ventilation inlet or outlet in any way as the unit may overheat and pose a fire risk (applies to fan-assisted heaters).
8. Do not cover the ventilation grille or block the air inlet and outlet by placing the device against any surface. Maintain a distance of at least 1 meter from the front and sides of the device. For wall-mounted devices, maintain a distance of 1 meter from the rear of the device.
WARNING: THERE IS A RISK OF FIRE IF THE HEATER IS COVERED OR PLACED IN CLOSE TO CURTAINS OR OTHER FLAMMABLE MATERIALS.
9. Do not place the device near radiant heat sources.
10. Do not use in areas where flammable substances such as gasoline, paints or other flammable liquids are used or stored.
11. The appliance becomes hot during operation. To avoid burns, do not touch hot surfaces. Turn off the appliance and use the handles when moving the heater.
12. Do not use the appliance to dry clothes.
13. Do not leave the device unattended while operating.
14. Do not insert anything into the ventilation or exhaust holes, as this may cause electric shock, fire or damage to the device.
15. Do not immerse the device in liquid or allow liquid to enter the device as this may create a risk of electric shock.
16. Do not use the device on a wet surface or in places where it may be dropped or submerged in water.
17. Do not reach for a device that has fallen into water. Unplug the device and disconnect it from the power outlet immediately.
18. Do not operate this appliance if it has a damaged cord or plug, or after it has been damaged, dropped, or otherwise damaged in any way. Consult a qualified electrician for examination, adjustment, repair, or service before further use.
19. Do not use the device when your hands are wet.
20. The device is intended for home use, not commercial or industrial use.
21. Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may result in fire, electric shock, or injury.
22. One common cause of device overheating is a buildup of dust and lint inside the device. Regularly remove this buildup by unplugging the device and cleaning the vents and grilles where possible.
23. Do not use the device near a window, as rain may cause electric shock.
24. Do not connect the device to the mains until it has been installed in its final location and adjusted to the position in which it will be used.
25. The appliance is not intended for use in bathrooms, laundry rooms or other rooms that may be exposed to moisture, water or humidity.
26. Turn off the device, then use the handles (if available) to reposition it.
27. Do not use the appliance with the cord wound up as this may cause heat build-up which poses a risk.
28. Using an extension cord with this device is not recommended.
29. Disassembling the radiator yourself is not allowed.
30. Do not remove the plug from the socket by pulling the cord – grasp the plug.
31. Always turn off the device when not in use.
32. Do not allow the cord to touch hot surfaces during operation.
33. Do not hide the cord under carpets, rugs, runners, etc. Place the cord where it will not be a tripping hazard.
34. Do not touch the metal casing, as it becomes hot during operation. Keep the heater out of reach of children to avoid the risk of burns. After turning off the device, wait several minutes for the heater to cool before safely storing it in its packaging.
35. Do not twist, bend, or wrap the cord around the device, as this may weaken the insulation and cause it to crack. Ensure the cord is completely removed from the cord storage area before use.
36. Do not store the device in a box or enclosed space until it has cooled down sufficiently.
37. The appliance is not intended for use by persons (including children) with limited physical, sensory or mental capabilities or lack of experience and knowledge, unless they are supervised or have been instructed on how to use the appliance safely.
38. Children should be supervised to ensure that they do not play with the appliance.
39. The device must not be placed directly under an electrical socket.
40. Do not use this appliance with a programmer, timer or other device that automatically switches the heater on, as there is a risk of fire if the appliance is covered or positioned incorrectly.
41. If the supply cord is damaged, it must be replaced by a qualified electrician in order to avoid a hazard.
42. To avoid risks associated with accidental resetting of the thermal cut-out, the appliance must not be powered through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the mains.